nC Protect 4600 Pipe Tank Finish

nC Protect 4600 Pipe Tank Finish

241.542,147.71

nC Protect 4600 Pipe Tank Finish is a transparent coating developed to protect materials from abrasion, corrosion and fouling. It can be applied on all metals, stainless steel and aluminium, coated or non-coated. nC Protect 4600 Pipe Tank Finish is approved for food  contact according to FDA specifications. It is not permeable and suited for permanent submersion. It is developed to enhance the tear-off rate of traditional paints.

Clear
SKU: N/A Category: Product ID: 4867

Benefits

TECHNICAL BENEFITS

  • Forms ionic chemical bond with stainless steel and aluminium
  • Strongly abrasion resistant, Mohs H9-H10
  • Chemical resistant
  • Extremely anti-corrosive
  • Not permeable
  • Shear and shockload resistant
  • Prevents fouling from sticking to surface
  • Flexible in freezing temperatures
  • Transparent
  • Foodgrade
  • Free of fluor

OPERATIONAL BENEFITS

  • Transparent finish allows direct view on material
  • Fast drying
  • Functions in temperatures between -50°C to 630° C
  • Easy-to-clean without soaps or chemicals
  • Easy spot-repair possible

FINANCIAL BENEFITS

  • Low cost per m²
  • Long lasting protection up to 15 years
  • Significantly reduces downtime for maintenance
  • Reduces repainting related costs to minimum
  • Reduces cleaning costs

Description

nC Protect 4600 Pipe Tank Finish is a transparent coating developed to protect materials from abrasion, corrosion and fouling. It can be applied on all metals, stainless steel and aluminium, coated or non-coated. nC Protect 4600 Pipe Tank Finish is approved for food  contact according to FDA specifications. It is not permeable and suited for permanent submersion. It is developed to enhance the tear-off rate of traditional paints.

nC Protect 4600 Pipe Tank Finish bonds chemically into materials and their surfaces. Its ultra-thin, glass-like finish and lasting soiling protection to smooth, non-suction surfaces is used to protect against negative chemical and environmental influences. It is user ready and can be applied by brush, roller, cloth and airgun (HVLP).

Instructions

This product is intended for professional use only. Application must be done by qualified craftsmen/women to get the optimal results.

  • Substrate must be free from grease, dirt, dust and water or moist.
  • Substrate temperature must be between 5° C and 30° C.
  • Do not apply when ambient humidity exceeds 80%.
  • Do not let nC Protect 4600 Pipe Tank Finish make contact with water during application or during cure time (first 12 hours).
  • Product is ready to use. DO NOT USE ANY THINNER!
  • Use safety glasses and adequate ventilation. Protect skin from exposure using gloves and appropriate clothing.
  • Film thicknesses can be varied from between 2 – 10 µm, depending on application conditions.
  • Application rate varies between 12ml to 20ml per m², depending on surface and already present coating or paint.
  • nC Protect 4600 Pipe Tank Finish is very thin and fluid, take care not to use too much product!
  • In case of HVLP application use 2 – 3 bar pressure and 0,8mm – 1,3mm nozzle.
  • Keep uncured product from flame, all ignition sources, and moisture.
  • nC Protect 4600 Pipe Tank Finish must be applied in one go. Because of the repelling characteristics of the coating, stains, open spots or other mistakes can be repaired within 10 minutes after first application. After 10 minutes, the coating starts to repel any layer that will be applied, including paint, solvent or other fluids.
  • Dry to touch in ambient temperatures above 10° C : 1 to 2 hours
  • Curing times, after which coating can be put into full operation:
  • Ambient temperatures between 10° C and 20° C: 8 to 12 hours
  • Heated to 60° C: 150 mins
  • Heated to 80° C: 120 mins
  • Heated to 180° C: 60 mins
  • Full strength will be reached after 3 to 5 days.
  • Clean tools immediately after use with (butyl)acetone or mineral spirits. Solvent cleaning can be followed by a wash with soapy water. Cured material cannot be removed with solvent. Proper clean-up of equipment is essential.

The product is dry to touch within 1 up to 2 hours and in most cases can be applied while equipment is in operation. As nanotechnology is about bonding into surfaces and matrices of nanoparticles need to be built up after application, the coating reaches full insulating ability AFTER a cure time of approximately 3 to 5 days, which is dependent upon environmental variables, humidity, and thickness of coat used. Test of maximum performance should be performed after full cure. Benefits will typically begin to be seen approximately 12 hours after application, and will continue to improve as the cure time completes. Cure time won’t interfere with normal operations, you can continue to use your equipment as usual while the product cures.

Logistic Info

  • Store nC Protect 4600 Pipe Tank Finish at temperatures between 5° C and 30° C.
  • nC Protect 4600 Pipe Tank Finish can be stored for 2 years for unopened containers.
  • Storage life for opened containers will be determined by the precautions taken to keep containers tightly sealed and protected from moisture. Maximum storage for opened containers is 12 months.
  • Open used containers every 3 months to release possible pressure build up.
  • nC Protect 4600 Pipe Tank Finish is available in containers of 0,25L, 1L and 5L.
  • Delivery time 3 to 7 days.

ADR UN-Nummer:  2924

Proper shipping name:  Flammable liquid, corrosive, n.o.s.

(organic Polysilazane Composit, n-Butylacetat) 12 / 15

Class:  3

Packing group:  II

 

IATA UN-Nummer:  2924

Proper shipping name:  Flammable liquid, corrosive, n.o.s.

(organic Polysilazane Composit, n-Butylacetat) 12 / 15

Class:  3

Packing group:  II

 

IMDG UN-Nummer:  2924

Proper shipping name:  Flammable liquid, corrosive, n.o.s.

(organic Polysilazane Composit, n-Butylacetat) 12 / 15

Class:  3

Packing group:  II

 

RID UN-Nummer:  2924

Proper shipping name:  Flammable liquid, corrosive, n.o.s.

(organic Polysilazane Composit, n-Butylacetat) 12 / 15

Class:  3

Packing group:  II

Downloads

nC Protect 4600 PT Finish FG Corrosiontests

nC Protect 4600 Pipe Tank Finish

Projects

Inland tanker Marie Louise

Special Offer

There are currently no special offers on this product.